Completing The Parts Replacement - Lenovo 10A4 Hardware Maintenance Manual

Figure 289. Connecting the USB keyboard or mouse

Completing the parts replacement

After completing the installation or replacement of all parts, you need to reinstall the computer cover and
reconnect cables. Depending on the parts you installed or replaced, you might need to confirm the updated
information in the Setup Utility program. Refer to Chapter 5 "Using the Setup Utility program" on page 55.
To reinstall the computer cover and reconnect cables to your computer, do the following:
1. Ensure that all components have been reassembled correctly and that no tools or loose screws are left
inside your computer. See "Locating major FRUs and CRUs" on page 87 for the locations of various
components in your computer.
2. Before reinstalling the computer cover, ensure that the cables are routed correctly. Keep cables clear of
the hinges and sides of the computer chassis to avoid interference with reinstalling the computer cover.
3. Position the computer cover on the chassis and then push the cover to the rear of the computer until it
snaps into position.
272
ThinkCentre M83 and M93/p Hardware Maintenance Manual