Installing Or Replacing The Front Usb Assembly - Lenovo 10A4 Hardware Maintenance Manual

Figure 122. Installing the card reader assembly
8. Install the screw to secure the card reader assembly to the chassis.
Figure 123. Installing the screw to secure the card reader assembly
9. Connect the cable of the new card reader assembly to the front USB connector 1 on the system board.
See "Locating parts on the system board" on page 81
What to do next:
• To work with another piece of hardware, go to the appropriate section.
• To complete the installation or replacement, go to "Completing the parts replacement" on page 224.

Installing or replacing the front USB assembly

This section provides instructions on how to install or replace the front USB assembly.
166
ThinkCentre M83 and M93/p Hardware Maintenance Manual