Figure 204. Installing the Wi-Fi adapter card
5. If the installed Wi-Fi card module supports the Bluetooth function, use a Bluetooth cable to connect the
Bluetooth connector on the Wi-Fi adapter card to the front USB connector 1 on the system board. See
"Locating parts on the system board" on page 81.
Figure 205. Connecting the Bluetooth cable
What to do next:
• To work with another piece of hardware, go to the appropriate section.
• To complete the installation or replacement, go to "Completing the parts replacement" on page 224.
Installing or removing the rear Wi-Fi antenna
This section provides instructions on how to install or remove the rear Wi-Fi antenna.
Installing the rear Wi-Fi antenna
Attention: Do not open your computer or attempt any repair before reading and understanding the Chapter
1 "Safety information" on page 1.
Chapter 9
.
Replacing FRUs (machine types: 10A2, 10A3, 10A8, 10A9, 10AH, 10AJ, 10AM, and 10AN)
217