License Plate Lamp
To replace the license plate lamp bulb, do the
following:
1. Remove the two screws holding the license
plate lamp assembly to the fascia.
2. Turn and pull the license plate lamp forward
through the fascia opening.
3. Turn the bulb socket counterclockwise and
pull the bulb straight out of the socket.
368
4. Install the new bulb.
5. Reverse Steps 1 through 3 to reinstall the
lamp assembly.
Replacement Bulbs
Exterior Lamp
Back-up Lamp
Coupe and Retractable
Hardtop
Sedan
Center High-Mounted
Stoplamp (CHMSL)
Front Parking and
Turn Signal Lamp
Front/Rear Sidemarker Lamp
Bulb Number
921
3057K
912***
3157KX
194