Pontiac 2007 G6 Owner's Manual page 160

After the hardtop has raised completely, release
the switch. If you continue to press the switch for
about two seconds after the hardtop has raised
completely, the windows will automatically close.
If pressure is released from the switch before the
hardtop cycle is complete, the cycle will stop and
the Driver Information Center (DIC) will display the
TOP NOT SECURE message. Always press and
hold the switch until a chime sounds, if the engine
is on, and the Driver Information Center (DIC)
displays the TOP MOVE COMPLT to signal the
procedure is complete. See DIC Warnings and
Messages on page 212 for more information.
160
The hardtop will not operate if the vehicle has an
electrical failure. If an electrical failure occurs,
see your dealer for service.
If your vehicle has an electrical failure while
operating the hardtop, and must be towed to a
dealer for service, your vehicle should be towed by
flatbed with the vehicle facing backwards. Consult
your dealer or professional towing service if you
need to have your disabled vehicle towed. See
Roadside Assistance Program on page 456.