Power Supply Assembly - Lenovo ThinkStation P520 User Manual

7. Install the cover as shown. Then, slide the cover latches to the locked position.
Figure 92. Closing the cover
8. Install the M.2 solid-state drive PCIe adapter in a PCIe x16 card slot on the system board. See "Parts on
the system board" on page 7 and "Full-length PCIe card" on page 115.
What to do next:
• To work with another piece of hardware, go to the appropriate section.
• To complete the installation or replacement, go to "Completing the parts replacement" on page 134.

Power supply assembly

Attention: Do not open your computer or attempt any repair before reading and understanding the "Read
this first: Important safety information" on page v.
Although there are no moving parts in your computer after the power cord has been disconnected, the
following warnings are required for your safety.
CAUTION:
Keep fingers and other parts of your body away from hazardous, moving parts. If you suffer an injury,
seek medical care immediately.
.
Chapter 7 Hardware removal and installation
107