7. To install the Wi-Fi adapter, install the Wi-Fi adapter into the PCIe card slot on the system board. See
"Parts on the system board" on page 7. Then, pivot the PCIe card latch and push it back in until it snaps
into position.
Figure 126. Installing the Wi-Fi adapter
8. If the installed Wi-Fi card supports the Bluetooth function, connect a Bluetooth cable to the Wi-Fi
adapter.
Note: The Bluetooth cable connects the Bluetooth connector on the Wi-Fi adapter to the internal USB
3.0 connector on the system board. See "Parts on the system board" on page 7.
.
Chapter 7
Hardware removal and installation
133