Lenovo ThinkStation P520 User Manual page 85

6. Slide the bracket with the new 3.5-inch storage drive into the front-access storage enclosure until it
snaps into position. Press the notch to secure the enclosure cover and lock the enclosure cover with the
key.
Figure 19. Installing the 3.5-inch storage drive into the front-access storage enclosure
What to do next:
• To work with another piece of hardware, go to the appropriate section.
• To complete the installation or replacement, go to "Completing the parts replacement" on page 134.
2.5-inch storage drive
To remove or install a 2.5-inch storage drive, do the following:
1. Before removing an old 2.5-inch storage drive, safely eject the old storage drive from the operating
system first. For more information, see the Windows help system.
2. Unlock the enclosure cover with the provided key as shown. Press the notch
cover.
Figure 20. Opening the front-access storage enclosure cover
3. Press the pit on the bracket cover, and then grasp the tilted cover to pull the bracket out of the front-
access storage enclosure.
Figure 21. Removing the bracket from the front-access storage enclosure
4. To remove the 2.5-inch storage drive, do the following:
a to open the enclosure
.
Chapter 7 Hardware removal and installation
71