Table of Contents
Advertisement
4)
Press qw to switch the item.
f The items will switch each time you press the button.
[ON]
[OFF]
Setting [WARNING MESSAGE]
Set the display/hide of the warning message.
1)
Press as to select [ON-SCREEN DISPLAY].
2)
Press the <ENTER> button.
f The [ON-SCREEN DISPLAY] screen is displayed.
3)
Press as to select [WARNING MESSAGE].
4)
Press qw to switch the item.
f The items will switch each time you press the button.
[ON]
[OFF]
Note
f If [OFF] is set, the warning message will not be displayed on the projected image even when warning condition such as [TEMPERATURE
WARNING] is detected while using the projector. Also, the following countdown message is not displayed: the message until the power
is turned off after the no signal lights-out function is executed; the message until the light source is turned off after the no signal lights-out
function is executed
[MENU MODE]
Set the display mode of the menu screen (OSD).
1)
Press as to select [MENU MODE].
2)
Press qw to switch the item.
f The items will switch each time you press the button.
[NORMAL]
[SIMPLE]
Note
f For the menu items that are displayed when [SIMPLE] is set, refer to "Main menu" (x page 95), "Sub-menu" (x page 96).
[BACK COLOR]
Set the display of the projected screen when there is no signal input.
1)
Press as to select [BACK COLOR].
2)
Press qw to switch the item.
f The items will switch each time you press the button.
[BLUE]
[BLACK]
[DEFAULT LOGO]
[USER LOGO]
Note
f To create and register the [USER LOGO] image, use "Logo Transfer Software". The software can be downloaded from the Panasonic
website (https://panasonic.net/cns/projector/).
150 - ENGLISH
Chapter 4 Settings — [DISPLAY OPTION] menu
Displays the input guide.
Hides the input guide.
Displays the warning message.
Hides the warning message.
Displays all menu items.
Displays some of the menu items that are used for basic setting or adjustment.
Displays the entire projection area in blue.
Displays the entire projection area in black.
Displays the Panasonic logo.
Displays the image registered by the user.
Advertisement
Table of Contents
