Table of Contents
Advertisement
[CONVERGENCE]
Correct the position shift of the three primary colors of red, green, and blue in the projected image.
1)
Press as to select [CONVERGENCE].
2)
Press qw to switch the item.
f The items will switch each time you press the button.
[OFF]
[ON]
f Proceed to Step 3) when [ON] is selected.
3)
Press the <ENTER> button.
f The [CONVERGENCE] screen is displayed.
4)
Press as to select the color to adjust, and press the <ENTER> button.
5)
Press as to select the position on the projected image to adjust and adjustment direction, and
press qw to adjust.
Note
f The picture quality may degrade when the convergence function is used.
f It is recommended to perform the adjustment with the convergence function after 30 minutes have elapsed with the focus test pattern
displayed. For details of the test pattern, refer to "[TEST PATTERN] menu" (x page 193).
Chapter 4 Settings — [POSITION] menu
Disables the convergence function.
Enables the convergence function.
ENGLISH - 113
Advertisement
Table of Contents
