Pipe Unit Cleaning; Fume Pipes Annual Cleaning; General Cleaning; Cleaning Of Painted Metal Panels - Cadel IDRO PRINCE3 12 Installer Manual

Fig. 22 - Turbulator cleaning lever (Idro Prince 16-23-23 H2O, Aquos 16- Fig. 23 - Turbulator cleaning lever (Idro Prince 30-30 H2O)
3 3
23-23 H2O, Idron 16-22 Airtight, Hidrofire 22.8)

15.8 PIPE UNIT CLEANING

For improved boiler performance, once a month it is necessary to clean the pipes inside the combustion chamber.
Open the firebox door and use the supplied brush to clean the 5 pipes located at the top inside the combustion chamber. Do this
several times so that the ash deposited inside these pipes falls into the lower area around the brazier.
Use a vacuum cleaner to remove all the fallen material.
Fig. 24 - Pipe unit cleaning

15.9 FUME PIPES ANNUAL CLEANING

Clean annually from soot with brushes.
The cleaning operation must be executed by a specialized stove-repairer who will provide for the cleaning of fume pipe, chimney
flue and chimney pot. He will also check their eficiency and will release a written declaration of the safety of the appliance. This
operation must be executed at least once a year.

15.10 GENERAL CLEANING

For cleaning external and inner parts of the stove do not use steel wools, muriatic acid or other corrosive and abrasive materials.

15.11 CLEANING OF PAINTED METAL PANELS

To clean painted metal panels use a soft cloth. Do not use degreasant agents like alcool, diluents, acetone, gasoline because these
could irremediably damage the varnish.

15.12 CLEANING OF CERAMIC AND STONE PANELS

Some stove models has an external lining made up of ceramic or stone. These pieces are handmade therefore they could inevitably
present crazings, seedinesses, shadings.
To clean ceramic or stone panels use a soft and dry cloth. If using any cleaners this will seep through the crazings putting them in
evidence.
26
IDROSTUFE