Hopper Cleaning; Ash Drawer Cleaning Idroprince - Aquos - Idron - Mira - Tesis; Ash Drawer Cleaning Maya - Cadel IDRO PRINCE3 12 Installer Manual

Hide thumbs Also See for IDRO PRINCE3 12:

Table of Contents

Fig. 15 - Example of cleanly brazier

Fig. 16 - Example of dirty brazier

15.3 HOPPER CLEANING

Per each pellets supply, check the probable presence of meal, sawdust and other remanins on the hopper bottom. If present, they

must be removed with the aid of a vacuum cleaner (see Fig. 17 ).

Fig. 17 - Hopper cleaning

Press door "H" to the bottom right and open it. Turn the handle of door "G" to the right and open it downwards.

Pull out and empty ash drawer "D". Remove any ash residue from the compartment before reinserting the drawer. Experience and

pellet quality will determine the frequency of the ash drawer cleaning. In any case, it is advisable not to exceed 2 or 3 days.

When cleaning the ash drawer, we recommend removing part "C" near the brazier and using a vacuum cleaner nozzle to remove

any ash build-up.

Fig. 18 - Drawer removal

Fig. 19 - Brazier removal

Lift part "C" from its place and remove brazier "B". Use the vacuum nozzle to clean away any ash from the area under the brazier.

We recommend performing this operation every 2-3 days depending on what type of pellet is being used.

Open the panel "H". Turn the handle of door "G" to the right and open it by moving it downwards.

IDROSTUFE

Table of Contents