Table of Contents
Advertisement
Insert the new bulb so that the base lo-
cates in the recess on the holder.
From below, press connector 2 with
bulb upward onto the reflector.
Align housing cover 1 and click into
place.
Front turn signal bulb
Switch off the lights.
Open the hood ( page 260).
Twist bulb socket 4 counterclockwise
and pull out.
Gently push bulb into socket, turn
counterclockwise and remove.
Insert new bulb in socket, push in and
twist clockwise.
Reinsert bulb socket in lamp and twist
clockwise.
Parking and standing lamp bulb
Switch off the lights.
Open the hood ( page 260).
Press ends of housing cover 1 tab to-
gether and remove cover.
Pull out the bulb socket with the bulb.
Pull the bulb out of the bulb socket.
Insert a new bulb in the socket.
Reinstall the bulb socket.
Align housing cover and click into
place.
Practical hints
Replacing bulbs
Side marker lamp bulb
Switch off the lights.
Carefully slide lamp towards rear.
Remove front end first.
Twist bulb socket counterclockwise
and pull out.
Pull bulb out of the bulb socket.
Insert new bulb in socket.
Reinstall bulb socket, push in and twist
clockwise.
To reinstall lamp, set rear end in
bumper and let front end snap into
place.
339
Advertisement
Table of Contents
