Table of Contents
Advertisement
Controls in detail
Driving systems
The following vehicle level settings can be
selected when the vehicle is stationary:
Vehicle level when
Use for
stationary
Normal level
Normal operation
Raised level 1
Driving with snow
chains ( page 281)
Raised level 2
Very rough road surface
conditions
1
Dependent on load
The switch with the indicator lamps is lo-
cated in the upper part of the center con-
sole.
212
Ride height increase
Automatic lowering
over normal
None
Max. approx. 0.4 in (11 mm)
1
Max. 0.55 in (14 mm)
Max. approx. 0.55 in (14 mm) One lamp on
1
Max. 0.95 in (24 mm)
Max. approx. 0.95 in (24 mm) Both lamps on
1 Indicator lamps
2 Vehicle level control switch
Indicator lamps
Both lamps off
Briefly press switch 2 to change from
one level setting to the next. When ve-
hicle is at raised level 2, pressing the
switch will return the vehicle to normal
level.
The message:
ACTIVE BODY CONTROL
VEHICLE RISING!
appears in the multifunction display.
The display switches off when the vehi-
cle is raised.
Advertisement
Table of Contents
