Power Windows; Opening And Closing The Windows - Mercedes-Benz 2004 CL-Class Operator's Manual

Cl-class
Table of Contents

Advertisement

Controls in detail

Power windows

Power windows

Opening and closing the windows

The side windows can be opened and
closed electrically. The switches for all the
side windows are on the driver's door. The
switches for the respective windows are
on the passenger door and on the rear cen-
ter console.
1 Left front window
2 Right front window
3 Right rear window
4 Left rear window
5 Rear window override switch
( page 75)
186
Additional switches for the rear windows
are located on the rear center console.
6 Left rear window
7 Right rear window
Warning!
When closing the windows, make sure that
there is no danger of anyone being harmed
by the closing procedure.
The closing of the door windows can be im-
mediately halted by releasing the switch or,
if switch was pressed past the resistance
point and released, by pressing the respec-
tive switch.
The closing of the rear side windows can be
immediately halted by releasing the switch.
The door windows are equipped with the ex-
press-close and automatic reversal func-
tion. If a door window encounters an
obstruction that blocks its path in a circum-
stance where you pressed the switch past
the resistance point and released it to close
the window, the automatic reversal function
will stop the window and open it slightly.
If a door window encounters an obstruction
that blocks its path in a circumstance where
you are closing the window by pressing and
holding the switch, by pressing and holding
button ‹ on the SmartKey, or by press-
G
ing and holding the lock button
(vehicles with KEYLESS-GO*) on the door
handle, the automatic reversal function will
not operate.
When leaving the vehicle, always remove the
SmartKey from starter switch, take the
SmartKey with KEYLESS-GO* with you, and
lock your vehicle.

Advertisement

Table of Contents
loading

Table of Contents