Shifting Procedure - Jeep 2004 Grand Cherokee Owner's Manual

speed. Additional traction and maximum pulling power
for loose, slippery road surfaces only. Do not exceed 25
mph (40 km/h).

Shifting Procedure

4 ALL TIME to 4 LO or 4 LO to 4 ALL TIME
With the vehicle rolling at 2 to 3 mph (3 to 5 km/h), shift
the transmission into N (Neutral). While the vehicle is
STARTING AND OPERATING 193
coasting at 2 to 3 mph (3 to 5 km/h), shift the transfer
case lever firmly into the desired position. Do not pause
in transfer case N (Neutral).
NOTE: Pausing in transfer case N (Neutral) in vehicles
equipped with an automatic transmission may require
shutting the engine OFF to avoid gear clash while
completing the shift. If difficulty occurs, shift the trans-
mission into N (Neutral), hold foot on brake, and turn the
engine OFF. Make shift to desired mode.
NOTE: Shifting into or out of 4LO is possible with the
vehicle completely stopped, however difficulty may oc-
cur due to the mating clutch teeth not being properly
aligned. Several attempts may be required for clutch
teeth alignment and shift completion to occur. The pre-
ferred method is with the vehicle rolling 2 to 3 mph (3 to
5 km/h). Avoid attempting to engage or disengage 4LO
with the vehicle moving faster than 2 to 3 mph (3 to 5
km/h).
5