After Starting; Engine Block Heater - If Equipped - Jeep 2004 Grand Cherokee Owner's Manual

178 STARTING AND OPERATING

After Starting

The idle speed will automatically decrease as the engine
warms up.
CAUTION!
Long periods of engine idling, especially at high
engine speeds can cause excessive exhaust tempera-
tures which can damage your vehicle. Do not leave
your vehicle unattended with the engine running.
ENGINE BLOCK HEATER — IF EQUIPPED
The engine block heater warms engine coolant and
permits quicker starts in cold weather. Connect the cord
to a standard 110-115 volt AC electrical outlet with
grounded, three wire extension cord.
Use the heater when temperatures below 0°F (-18°C) are
expected to last for several days.
The engine block heater cord is located:
• 6-cylinder engine — bundled and fastened to the
injector rail between injectors 1 and 2.
• V-8 engine — coiled and strapped to the transmission
filler tube.
WARNING!
Remember to disconnect the cord before driving.
Damage to the 110-115 volt AC electrical cord could
cause electrocution.