Front Turn Signal And Parking Lamps; Daytime Running Lamps (Drl) - Hummer 2006 H2 Owner's Manual

Front Turn Signal and
Parking Lamps
To replace a front turn signal or parking lamp bulb, do
the following:
1. Open the hood. See Hood Release on page 5-11
for more information.
2. Locate the bulb you need to change.
4. Pull the bulb from the bulb socket.
5. Install the new bulb into the bulb socket.
6. Reinstall the bulb socket into the lamp housing and
turn it clockwise until it locks.
5-48
3. Turn the bulb socket
counterclockwise and
remove it from the
lamp housing.

Daytime Running Lamps (DRL)

To replace a daytime running lamp bulb, do
the following:
2. Turn the bulb socket counterclockwise and remove
it from the lamp housing.
3. Remove the bulb from the bulb socket.
4. Install the new bulb into the bulb socket.
5. Reinstall the bulb socket into the lamp housing and
turn it clockwise until it locks.
1. Locate the lamp
assembly behind the
front bumper. It is
easiest to come in from
the side of the
vehicle through the
wheel opening.