License Plate Lamp; Replacement Bulbs - GMC 2009 Yukon XL Owner's Manual

License Plate Lamp

1. Remove the two screws holding each of the license
plate lamps to the molding that is part of the liftgate.
2. Twist and pull the license plate lamp forward
through the molding opening.
5-58
3. Turn the bulb socket counterclockwise and pull the
bulb straight out of the socket.
4. Install the new bulb.
5. Reverse Steps 1 through 3 to reinstall the license
plate lamp.

Replacement Bulbs

If your vehicle is a Two-mode Hybrid, see the Two-mode
Hybrid manual for more information.
Exterior Lamp
Back-up Lamp
License Plate Lamp
Rear Turn Signal Lamp, Taillamp,
and Stoplamp
For replacement bulbs not listed here, contact your
dealer/retailer.
Bulb Number
7441
168
3057KX