Cruise Control - GMC 2009 Yukon XL Owner's Manual

Cruise Control

CAUTION:
{
Cruise control can be dangerous where you
cannot drive safely at a steady speed. So, do not
use the cruise control on winding roads or in
heavy traffic.
Cruise control can be dangerous on slippery roads.
On such roads, fast changes in tire traction can
cause excessive wheel slip, and you could lose
control. Do not use cruise control on slippery roads.
With cruise control, a speed of about 25 mph (40 km/h)
or more can be maintained without keeping your foot
on the accelerator. Cruise control does not work
at speeds below about 25 mph (40 km/h).
When the brakes are applied, cruise control is turned off.
If the vehicle has StabiliTrak
to limit wheel spin, cruise control will automatically
disengage. See StabiliTrak
When road conditions allow the cruise control to be
safely used again, it can be turned back on.
3-12
®
, and the system begins
®
System on page 4-6.
The cruise control buttons are located on left side of the
steering wheel.
T
(On/Off): This button can both activate and turn off
the system. The indicator light on the button turns on
when cruise control is on and turns off when cruise
control is off.
+ RES (Resume/Accelerate): Press to make the
vehicle accelerate or resume to a previously set speed.
SET− (Set/Coast): Press to set the speed or make
the vehicle decelerate.
[
(Cancel): Press to cancel cruise control without
erasing the set speed from memory.