Table of Contents
Advertisement
Using the Re-dial Command
b g
1. Press and hold
responds with "Ready" followed by a tone.
2. After the tone, say "Re-dial". The system responds
with "Re-dial using <phone name>" and dials the
last number called from the connected Bluetooth
phone.
Once connected, the person called will be heard
through the audio speakers.
Receiving a Call
When an incoming call is received, the audio system
mutes and a ring tone is heard in the vehicle.
b g
•
Press
and begin speaking to answer the call.
c x
•
Press
to ignore a call.
Call Waiting
Call waiting must be supported on the Bluetooth phone
and enabled by the wireless service carrier to work.
b g
•
Press
to answer an incoming call when
another call is active. The original call is placed
on hold.
b g
•
Press
again to return to the original call.
for two seconds. The system
•
To ignore the incoming call, continue with the
original call with no action.
c x
•
Press
to disconnect the current call and
switch to the call on hold.
Three-Way Calling
Three-Way Calling must be supported on the Bluetooth
phone and enabled by the wireless service carrier
to work.
1. While on a call press
with "Ready" followed by a tone.
2. Say "Three-way call". The system responds with
"Three-way call, please say dial or call".
3. Use the dial or call command to dial the number of
the third party to be called.
4. Once the call is connected, press
the callers together.
Ending a Call
c x
Press
to end a call.
b g
. The system responds
b g
to link all
3-121
Advertisement
Chapters
Table of Contents
