124
Vehicle Care
2. Turn the bulb holder counterclockwise
and remove it from the assembly.
3. Remove and replace the bulb socket with
bulb and attach the plug connector.
4. Insert the bulb socket into the assembly
and turn clockwise to engage.
5. Install the cover trim back .
License Plate Lamp
Lamp Assembly
1. Bulb Socket
2. Bulb
3. Lamp Assembly
To replace one of these bulbs:
1. Open the trunk.
2. Push the lamp assembly outboard to
remove.
3. Pull the lamp assembly down to remove
it from the trunk.
4. Turn the bulb socket (1) counterclockwise
to remove it from the lamp assembly (3).
5. Pull the bulb (2) straight out of the bulb
socket (1).