Etsi Feature - Nortel N0060609 Installation Manual

Table 5 Call Display Services (Sheet 2 of 2)
Service Description
Call log - FEATURE 812
view Call Log displays use the following special characters:
• underline: identifies a new item
• handset icon: identifies answered calls
• globe icon: identifies long distance calls
• forward slash: identifies that the information has been shortened
To view your Call Log:
1. Press FEATURE 812.
2. Press * to view old items.
Press # to view new items.
Press 0 to return to the last viewed item.
3. Press # and * to move through your items.
4. Press the volume bar to view more information on an item.
Call log - To erase a Call Log entry:
erase entry
1. Press HOLD while viewing an item.
Call log - To return a call from your Call Log:
return call
1. Display the desired number on your telephone.
2. Edit the number, if required. You can add numbers for long distance dialing or line pool access
or remove numbers using the volume bar.
3. Press a line button.
4. Lift the handset.
Call log - options FEATURE *84
Select the type of calls that automatically are stored in your Call Log. Press # to see the next
setting. Press HOLD to select the displayed setting.
Call log - FEATURE *85
password Program a four-digit password for your Call Log. To reset a forgotten password, see your
system administrator.
Logit FEATURE 813
Store caller information for your current call in your Call Log.

ETSI feature

Table 6 ETSI feature
Feature Description
MCID FEATURE 897 must be entered 30 seconds after the caller hangs up, and before you hang up.
(ETSI feature) Record caller information for the last external call at the central office that assigned the line. This
feature works only if the incoming calls enter over ETSI ISDN lines, and the feature is activated
in programming. Check with your system administrator.
ETSI is the European standard. The North American equivalent is ANSI.
Chapter 6 Telephone button icons
BCM 4.0 Telephony Device Installation Guide
45