Engine Coolant Heater (If Equipped) - GMC 1998 Safari Owner's Manual

Table of Contents

Advertisement

3. If your engine still won't start (or starts but then
stops), wait 15 seconds and start over.
When the engine starts, let go of the key and the
accelerator pedal.
I
NOTICE:
Your engine is designed to work with the
electronics in your vehicle. If you add electrical
parts or accessories, you could change the way
the engine operates. Before adding electrical
equipment, check with your dealer. If you don't,
your engine might not perform properly.
If you ever have to have your vehicle towed, see
the part of this manual that tells how to do it
without damaging your vehicle. See "Towing
Your Vehicle" in the Index.
Fuel Regulator
You have a fuel regulator that shuts the fuel
off when the
engine reaches 5,600 rpm.
Engine Coolant Heater (If Equipped)
In very cold weather,
0°F (-lS0C) or colder,
the engine coolant heater
can help. You'll get easier
starting and better fuel
economy during engine
warm-up. Usually, the
coolant heater should be
plugged in a minimum of
four hours prior to starting
your vehicle.
To Use the Engine Coolant Heater
1. Turn off the engine.
2. Open the hood and unwrap the electrical cord.
The engine coolant heater cord is located on the
driver's side of the engine compartment, near the
power steering fluid reservoir.
3. Plug it into a normal, grounded 110-volt AC outlet.

Advertisement

Table of Contents
loading

Table of Contents