Ford 1997 Crown Victoria Manual page 63

Using the "SCAN" function
Pressing the "SCAN" button will begin the
scan mode up the frequency band, stopping
on each listenable station for approximately
five seconds.
To stop the scan mode on the presently
sampled station, press the "SCAN" button
again.
Setting the Station Memory Preset buttons
Your radio is equipped with 6 station
memory buttons. These buttons can be used
to select up to 6 preset AM stations and 12
FM stations (6 in FM1 and 6 in FM2).
Follow the easy steps below to set these buttons
to the desired frequencies:
1. Select a band, then select a frequency.
2. Press one of the memory preset buttons and
hold the button until the sound returns. That
station is now held in memory on that
button.
3. Follow the two steps above for each station
memory preset button you want to set.
NOTE: If the vehicle's battery is disconnected
the station memory preset buttons will
need to be reset.
61