Table of Contents
Advertisement
Cleaning the Engine
A clean engine is more efficient because a buildup of grease and
dirt acts as an insulator, keeping the engine warmer than usual.
Extreme care must be used if a power washer is used to
clean the engine. The high pressure fluid could penetrate
sealed parts and assemblies causing damage or malfunctions.
In order to avoid possible cracking of the engine block or
fuel injection pump, do not spray a hot engine or injection
pump with cold water.
The alternator, distributor and air intake must be covered.
Covering these components will help prevent water damage.
Never wash or rinse the engine while it is running. Water
getting into the engine may cause internal damage.
Cleaning the Wheels
Wash the wheels with the same detergent you use to wash your
vehicle's body. Do not use acid-based wheel cleaners, steel wool,
abrasives, fuel, or strong detergents. These substances will
damage protective coatings. Use tar and road oil remover to
remove grease and tar.
NOTE: Before going to a car wash, find out if the brushes are
abrasive.
Maintenance and Care
227
Advertisement
Table of Contents
