Power Steering Fluid - Ford 1997 Aspire Manual

Engine Coolant Drain and Flush
The proper procedures to completely drain and
flush the engine cooling system can be found in
the Service Manual for your vehicle or you can
see your dealer. See the order form located
before this chapter. Follow these recommended
procedures to ensure that your vehicle has the
specified engine level and 50/50 mixture of
cooling system fluid and water.
Checking Hoses
Check all engine and heater system hoses and
hose connections for deterioration, leaks, and
loose hose clamps as specified in the maintenance
schedule. Repair or replace with Motorcraft hoses
or equivalent as necessary.

Power Steering Fluid

Check the level of the power steering fluid at
least twice a year (i.e., every Spring and Fall).
Checking and Adding Power Steering
Fluid
1. Start the engine and let it run until the
power steering fluid reaches normal
operating temperature. The power steering
fluid will be at the right temperature when
the engine coolant temperature gauge in the
instrument cluster is near the center of the
normal operating temperature range.
2. While the engine idles, turn the steering
wheel back and forth several times. Make
sure that the cap assembly is installed at this
time.
3. Turn the engine off.
159