If The Light Is Flashing - Chevrolet 2008 Uplander Owner's Manual

This light comes on, as a check to show it is working,
when the ignition is turned ON/RUN but the engine is not
running. If the light does not come on, have it repaired.
This light also comes on during a malfunction in
one of two ways:
•
Light Flashing — A misfire condition has been
detected. A misfire increases vehicle emissions
and could damage the emission control system
on your vehicle. Diagnosis and service might
be required.
•
Light On Steady — An emission control system
malfunction has been detected on your vehicle.
Diagnosis and service might be required.

If the Light is Flashing

The following can prevent more serious damage to your
vehicle:
•
Reduce vehicle speed.
•
Avoid hard accelerations.
•
Avoid steep uphill grades.
•
If you are towing a trailer, reduce the amount of
cargo being hauled as soon as it is possible.
If the light stops flashing and remains on steady,
see "If the Light Is On Steady" following.
If the light continues to flash, when it is safe to do so,
stop the vehicle. Find a safe place to park the vehicle.
Turn the ignition off, wait at least 10 seconds, and restart
the engine. If the light remains on steady, see "If the
Light Is On Steady" following. If the light is still flashing,
follow the previous steps and see your dealer/retailer
for service as soon as possible.
3-45