Chevrolet 2008 Silverado 1500 Pickup Owner's Manual page 56

2. See Securing a Child Restraint in the Right Front
Seat Position (With Airbag Off Switch) on page 1-57
or Securing a Child Restraint in the Right Front
Seat Position (With Passenger Sensing System)
on page 1-62 or Securing a Child Restraint in
the Right Front Seat Position (Heavy Duty Crew
Cab Only) on page 1-66 for instructions on installing
the child restraint using the safety belts.
3. Push and pull the child restraint in different
directions to be sure it is secure.
1-52
If the position you are using
has an adjustable headrest
or head restraint and you
are using a single tether,
raise the headrest or head
restraint and route the
tether under the headrest
or head restraint and in
between the headrest or
head restraint posts.
Crew and Extended Cab Models
1. Attach and tighten the lower attachments to the
lower anchors. If the child restraint does not have
lower attachments or the desired seating position
does not have lower anchors, secure the child
restraint with the top tether and the safety belts.
Refer to your child restraint manufacturer
instructions and the instructions in this manual.
1.1. Find the lower anchors for the desired
seating position.
1.2. Put the child restraint on the seat.
1.3. Attach and tighten the lower attachments on
the child restraint to the lower anchors.
2. If the child restraint manufacturer recommends that
the top tether be attached, attach and tighten the top
tether to the top tether anchor (loop), if your vehicle
has one. Refer to the child restraint instructions and
the following steps: