Advertisement
Onboard Parallel Port
This item allows you to determine the I/O address of the onboard
parallel port controller.
The choice: 378H/IRQ7, 278H/IRQ5, 3BC/IRQ7, Disabled.
Parallel Port Mode
Select an operating mode for the onboard parallel (printer) port.
Select Normal unless your hardware and software require one of the other
modes offered in this field.
The choice: EPP1.9, ECP, SPP, ECPEPP1.7, EPP1.7.
ECP Mode Use DMA
Select a DMA channel for the parallel port for use during ECP
mode.
The choice: 3, 1.
EPP Mode Select
Select EPP port type 1.7 or 1.9.
The choice: EPP1.7, 1.9.
PWRON After PWR-Fail
During ON, after every AC power loss, the system will be turned
on. During Former Status, after every AC power loss, whatever the system
status, it will be the same when the AC power returns. During OFF, after
every AC power loss, the system will be shutdown.
The choice: ON, OFF, Former-Sts
Power Status Led
During Blink, the power LED will blink when the system enters the
suspend mode. When the mode is in Dual Color, the power LED will change
its color during suspend mode. Choose the Single Color and the power LED
will always remain lit.
The choice: Blink, Dual Color, Single Color.
3-34
®
Advertisement
