Advertisement
CPU Speed
This item is for Jumperless BIOS.
Check your processor and set this function accordingly. If you set
this to Manual, you can set the CPU Ratio and CPU Frequency accordingly.
CPU Frequencies are: 66, 68, 75, 83 and 100, 103, 112, 117, 124, 129, 133, 138,
143, 148, 153. Though 68, 75, 83, 103, 112, 117, 124, 129, 133, 138, 143,
148 and 153 frequencies are available, it is advised that you use these only
for testing since this is not stable as the CPU is not designed for these
frequencies. CPU ratio are: 3, 3.5, 4, 4.5, 5, 5.5, 6, 6.5, 7, 7.5, or 8.
Note: If you set the CPU Ratio and CPU Frequency to be too high, and the
system will not turn on, then restart the system. Press "F10" until bootup.
This will set the default setting.
CPU Host/PCI Clock
This item occurs when SWI is installed. CPU Frequencies are
available at: 66Mhz, 68Mhz, 75Mhz, 83Mhz and 100Mhz, 103MHz, 112Mhz,
117MHz, 124MHz, 129MHz, 133MHz, 138MHz, 143MHz, 148MHz, 153MHz.
The default setting is either 100MHz or 66Mhz depending on your CPU.
3-30
®
Advertisement
