Changing The Floppy Disk Drive - Fujitsu Siemens CELSIUS 4 Series Operating Manual

System expansions

Changing the floppy disk drive

Ê
Open the workstation (see "Opening the workstation").
Ê
Pull the data and the power supply connectors from the floppy disk drive (1).
Ê
Remove the screw (2).
Ê
Take the drive out of the workstation (3).
Ê
Take the new floppy disk drive out of its packaging.
Ê
Slide the drive into the workstation (1).
Ê
Plug the data and the power supply connectors into the floppy disk drive (2).
Ê
Fasten the drive with the screw (3).
Ê
Close the system unit (see "Closing the Workstation").
i
It may be necessary to modify the entry for the drive in the BIOS Setup.
42 - English
1
2
Installing and removing accessible drives
2
3
3
A26361-K547-Z400-1-7419