Installing and removing drives
Changing the floppy disk drive
²
Open the system unit (see
²
Pull the data and the power supply connectors from the floppy disk drive (1).
²
Remove the screw (2).
²
Take the drive out of the system unit (3).
²
Take the new floppy disk drive out of its packaging.
²
Slide the drive into the system unit (1).
²
Plug the data and the power supply connectors into the floppy disk drive (2).
²
Fasten the drive with the screw (3).
²
Close the system unit (see
If necessary, you must adapt the entry for the drive in the Setup menu.
i
A26361-K516-Z100-1-7619
"Opening the system
1
2
"Assembling the system
unit").
2
3
unit").
System expansions
3
1
37