Understanding The Scan Options - Lexmark CX517 User Manual

Scanning
Setting up Scan to Computer
Notes:
•
This feature is supported only in Windows Vista or later.
•
Make sure your computer and printer are connected to the same network.
1
Open the printers folder, and then select your printer.
Note: If your printer is not in the list, then add your printer.
2
Open the printer properties, and then adjust the settings as necessary.
3
From the control panel, touch Scan to Computer > select the appropriate scan setting > Send It.
Scanning to a flash drive
1
Load an original document faceup, short edge first into the ADF tray or facedown on the scanner glass.
Notes:
•
Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as
magazine clippings) into the ADF tray. Place these items on the scanner glass.
•
The ADF indicator light comes on when the paper is loaded properly.
2
If you are loading a document into the ADF tray, then adjust the paper guides.
3
Insert the flash drive into the USB port on the front of the printer.
Note: The USB Drive home screen appears.
4
Select the destination folder, and then touch Scan to USB drive.
Note: The printer goes back to the home screen after 30 seconds of inactivity.
5
Adjust the scan settings, and then touch Scan It.

Understanding the scan options

FTP
This option lets you enter the IP address for the FTP destination.
Note: An IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
File Name
This option lets you type a file name for the scan image.
Original Size
This option lets you set the paper size of the documents you are going to scan. When Original Size is set to
Mixed Sizes, you can scan an original document that contains mixed paper sizes (letter‑ and legal‑size pages).
119