Lexmark CX517 User Manual page 113

Faxing
Page Setup
This option lets you change the following settings:
•
Sides (Duplex)—This specifies if the original document is printed on one side or on both sides of the page
(duplex). This also identifies what needs to be scanned for inclusion in the fax.
•
Orientation—This specifies the orientation of the original document, and then changes the Sides (Duplex)
and Binding settings to match the orientation.
•
Binding—This specifies if the original document is bound on the long‑edge or short‑edge side.
Content
This option lets you specify the content type and source of the original document.
Select from the following content types:
•
Graphics—The original document is mostly business‑type graphics, such as pie charts, bar charts, and
animations.
•
Photo—The original document is mostly a photo or an image.
•
Text—The content of the original document is mostly text or line art.
•
Text/Photo—The original document is a mixture of text, graphics, and photos.
Select from the following content sources:
•
Black/White Laser—The original document was printed using a mono laser printer.
•
Color Laser—The original document was printed using a color laser printer.
•
Inkjet—The original document was printed using an inkjet printer.
•
Magazine—The original document is from a magazine.
•
Newspaper—The original document is from a newspaper.
•
Other—The original document was printed using an alternate or unknown printer.
•
Photo/Film—The original document is a photo from film.
•
Press—The original document was printed using a printing press.
Color
This option lets you set the output to either color or monochrome for the scanned image.
Delayed Send
This option lets you send a fax at a later time or date.
Scan Preview
This option lets you view the first page of the image before it is included in the fax. When the first page is
scanned, the scanning is paused and a preview image appears.
Note: This option appears only when a working printer hard disk is installed.
113