Chevrolet 2003 Malibu Owner's Manual page 197

Dinghy Towing
To tow your vehicle with all four wheels on the ground,
follow these steps:
m
1. Position the vehicle to tow and then secure it.
2. Turn the ignition switch to OFF.
3. Set the parking brake.
4. To prevent your battery from draining while the
vehicle is being towed, remove the following
fuses from the driver's side instrument panel fuse
block: A) Wiper, G) Powertrain Control Module
and J) Body Function Control Module. See
"Instrument Panel Fuse Block (Driver's Side)" in
Fuses and Circuit Breakers on page 5-82 for
location of these fuses.
5. Turn the ignition switch to ACCESSORY.
6. Shift your transaxle to NEUTRAL (N).
7.
Release the parking brake.
Remember to install the fuses once you reach your
destination. To reinstall a fuse:
1. Set the parking brake.
2. Remove the key from the ignition switch.
3. Reinstall the fuse.
Notice: Make sure that the towing speed does not
exceed 65 mph (1 10 km/h), or your vehicle could
be badly damaged.
4-30