Chevrolet 2003 Malibu Owner's Manual page 149

1
-:
sting the Speakers (Balance/Fade) Using RDS
AUDIO: To adjust the balance between the right
and the left speakers, push and release the AUDIO
knob until BAL appears on the display. Turn the knob to
move the sound toward the right or the left speakers.
To adjust the fade, push and release the AUDIO knob
until FADE appears on the display. Turn the knob to
move the sound toward the front or the rear speakers.
To adjust the balance and the fade to the middle position,
push the AUDIO knob, then push it again and hold it until
you hear one beep. The balance and the fade will be
adjusted to the middle position and the display will show
the speaker balance.
To adjust all tone and speaker controls to the middle
position, push and hold the AUDIO knob when no tone or
speaker control is displayed. The radio will produce one
beep and display ALL with the level display in the middle
position.
Your audio system is equipped with a Radio Data
System (RDS). RDS features are available for use on
FM stations that broadcast RDS information. Using RDS,
your radio can do the following:
Seek to stations broadcasting a selected type of
programming,
*
receive announcements concerning local and
display messages from radio stations, and
seek to stations with traffic announcements.
The RDS features of your radio rely upon receiving
specific RDS information from these stations and
will only work when this information is available. In rare
cases, a radio station may broadcast incorrect
information that will cause the radio features
to
work
improperly. If this happens, contact the radio station.
national emergencies,
When you are tuned to an RDS station, the call letters or
the station name will appear on the display instead of
the frequency. RDS stations may also provide the
time of day, a program type (PTY) for current
programming and the name of the program being
broadcast.
3-46