Chevrolet 2003 Malibu Owner's Manual page 150

DlSP (Display): Press this knob to change what
appears on the display while using RDS. The display
options are station name, RDS station frequency,
PTY and the name of the program (if available).
Pressing and holding this knob will activate the RDS
default display.
Finding PTY Stations
To select and find a desired PTY perform the following:
1.
2.
3.
4.
5.
Turn the P-TYPE LIST knob. TYPE and a PTY
will be displayed on the screen.
Select a category by turning the P-TYPE knob.
Once the desired category is displayed, press the
SEEK TYPE button to select the category and take
you to the category's first station.
If you want to go to another station within that
category and the category is displayed, press the
SEEK TYPE button once. If the category is not
displayed, press the SEEK TYPE button twice to
display the category and then to go to another
station.
If PTY times out and is no longer on the display,
go back to Step 1.
BAND (Alternate Frequency): Alternate frequency
allows the radio to switch to a stronger station with
the same program type. Press and hold BAND for
two seconds to turn alternate frequency on. AF ON
will appear on the display. The radio may switch
to stronger stations. Press and hold BAND again for
two seconds to turn alternate frequency off, AF OFF
will appear on the display. The radio will not switch to
other stations.
RDS Messages
ALERT!: Alert warns of local or national emergencies.
When an alert announcement comes on the current
radio station, ALERT! will appear on the display. You will
hear the announcement, even if the volume is muted
or a compact disc is playing. If the compact disc player
is playing, play will stop during the announcement.
You will not be able to turn off alert announcements.
ALERT! will not be affected by tests of the emergency
broadcast system. This feature is not supported by
all RDS stations.
3-47