Chevrolet 2003 Impala Owner's Manual page 178

Finding a Station
BAND: Press this button to switch between AM, FM,
FM2, or XM1, XM2 (USA only, if your radio is equipped
with XMTM Satellite Radio Service) or DAB1, DAB2
(Canada only, if your radio is equipped with DAB). The
display will show your selection.
TUNE: Turn this knob to choose radio stations.
For DAB (Canada only, if your radio is equipped with
DAB), the TUNE knob allows you to navigate the
DAB frequency range. Turning this knob will tune up or
tune down the range. The radio will display the letter
L with a number next to it (1 through 23). Each L number
refers to a frequency and there can be multiple
stations contained in one frequency. It may also take a
few seconds, once you have tuned to a frequency,
for that frequency to gather all of the stations.
Depending on how many stations are within a frequency,
with every tune up or down, you may be tuning to
another station or to another frequency. The display will
S h " \ ! !
p c ! r Se!ecti"ns.
4
SEEK
b
: Press the right or the left arrow to seek
to the next or to the previous station and stay there.
The radio will seek only to stations that are in the
SGTeZ€EdbaM?i 7 i d FnFjt~TLoT~t?Ta~SiEni3Qiial.
4
PSCAN (Preset Scan)
b
: Press and hold one of
the arrows for more than two seconds and the radio
will produce one beep. The radio will scan to the
first preset station stored on your pushbuttons, play for
a few seconds, then go on to the next preset station.
SCAN will appear on the display. Press one of the
arrows again or one of the pushbuttons to stop scanning
presets.
The radio will scan only to the preset stations that are in
the selected band and only to those with a strong
signal.
Setting Preset Stations
The six numbered pushbuttons let you return to your
favorite stations. You can set up to
30 stations (six AM,
six FM1 and six FM2, six XM1 and six XM2 (USA
only, if your radio is equipped with the XM Satellite
Radio Service) or DAB1 and DAB2 (Canada only, if your
radio is equipped with DAB), by performing the
following steps:
2. Press BAND to select AM, FMI or FM2, or XMI,
3. Tune in the desired station.
XM2, or DAB1, DAB2.
3-55