Disabling/Enabling Bluetooth - Omron 10 Series Instruction Manual

4.3

Disabling/Enabling Bluetooth

Warning
• This product emits radio frequencies (RF) in the 2.4 GHz band. DO NOT use
this product in locations where RF is restricted, such as on an aircraft or in
hospitals. Turn off the Bluetooth feature in this monitor and remove batteries
when in RF restricted areas. For further information on potential restrictions
refer to documentation on the Bluetooth usage by the FCC.
Bluetooth is enabled as default.
1. When your monitor is off, press and hold the
button (rear surface of the monitor) for more
than 10 seconds.
"oFF" flashes 3 times.
2. Press the [START/STOP] button to turn your
monitor off.
Note
• To enable Bluetooth, press and hold the
than 2 seconds. "on" appears on the display.
• Your monitor automatically turns off 2 minutes after the
completion.
• When Bluetooth is disabled, the "
4. Using Your Monitor with a Smart Device
button for more
" symbol appears.
31