Table of Contents
Advertisement
Ti-P1 Training
Forced Shutdown
If the machine freezes, hold
this switch down for 6
seconds.
However, this method can
damage the hard disk or
controller board, or cause
data loss.
Forced shutdown should
only be carried out when in
contact with a call center
operator, or by a technician,
after explaining the risk of
the operation to the
customer.
If the normal shutdown
process will not function
correctly, an ASIC on the
CTL board might be broken.
In this case, a technician visit
is necessary.
Slide 30
No additional notes
30
Advertisement
Table of Contents
