Startup And Shutdown - Ricoh Pro 8300 Series Cip Training

CIP Training Pro 8300 series
Throughput

Startup and Shutdown.

Front and left view
1. Main power switch
To operate the machine, the main power switch must be on. If it is off, open the main power switch's cover and
turn the switch on.
2. ADF
Lower the ADF over originals placed on the exposure glass.
If you load a stack of originals in the ADF, the ADF will automatically feed the originals one by one.
3. Exposure glass
Place originals face down here.
4. Control panel
5. Toner cartridge cover
Open to change toner cartridges.
6. Front left cover
Open to remove paper jams or turn on/off the AC power switch.
7. Front right cover
Open to remove paper jams.
8. Paper trays (Trays 1–3)
Load paper here. Tray 1 is a tandem tray where paper on the left side automatically moves to the right when
paper there has run out.
An indicator on the front left side of the tray lights while paper is feeding.
9. The switch is inside the front left cover.
10. AC power switch
Press to completely turn off the power of the machine. The AC power switch must be kept on in normal use.
The switch is inside the front left cover.
3
1 2
10
4
5
6
7
8
9
EAR123