Chevrolet 2001 Prizm Owner's Manual page 68

CAUTION:
-
If a LATCH type child restraint isn't attached
to its anchorage points, the restraint won't be
able to protect a child sitting there. In a crash,
the child could be seriously injured or killed.
Make sure that a LATCH
properly installed using the anchorage points,
or use the vehicle's safety belts to secure the
restraint. See "Securing a Child Restraint in a
Rear Seat Position" in the Index for information
on how to secure a child restraint in your vehicle
using the vehicle's safety belts.
1-56
-
type child restraint is
Securing a Child Restraint Designed for the
LATCH System
D
Find the anchors for the seating position you want to
use, where the bottom of the seatback meets the back
of the seat cushion.
D
Put the child restraint on the seat.
D
If the child restraint is forward
anchor points on the child restraint to the anchors in
the vehicle. The child restraint instructions will show
you how.
D
Attach the top strap to the top strap anchor.
See "Top Strap" in the Index. Tighten the top
strap according to the child restraint instructions.
D
Push and pull the child restraint in different
directions to be sure it is secure.
To remove the child restraint, simply unhook the top
strap from the top tether anchor and then disconnect the
anchor points.
-
facing, attach the