Chevrolet 2001 Prizm Owner's Manual page 58

Storing the Built-in Child Restraint
Always properly store the built
-
using the vehicle's lap shoulder belt.
1. Fasten the harness clip.
2. Remove the head restraint.
3. Install the head restraint so that the front side faces
the front of the vehicle. Don't push it all the way
down, yet.
1-46
-
in child restraint before
4. Using the fastener strip, attach the buckle strap to
the child restraint cushion. Make sure the harness is
unlatched and the buckle strap is flat on the cushion.