Chevrolet 1998 Lumina Owner's Manual page 51

12. Move the pad back against the child restraint
seatback. Make sure the harness goes through the
slots in the pad that match the height adjustment
slots being used.
fastener strip.
13. Press the upper edge of the pad against the
Securing a Child in the Built-in
Child Restraint
Now that the hamess is adjusted to the correct height
for your child, you're ready to use
the child restraint's
harness (E) to secure your child.
Don't use the vehicle's safety belts.
Using the vehicle's regular safety belts on a child
seated on the child restraint cushion can cause
serious injury to the child in a sudden stop or
crash. If a child is the proper size for the built-in
child restraint, secure the child using the child
restraint's harness. But children who are too
large for the built-in child restraint should sit on
the vehicle's regular seat and use the regular
safety belts.
WARNING! FAILURE TO FOLLOW THE
MANUFACTURER'S INSTRUCTIONS ON THE
USE OF THIS CHILD RESTRAINT SYSTEM
CAN RESULT IN YOUR CHILD STRIKING
THE
VEHICLE'S INTERIOR DURING A SUDDEN
STOP OR CRASH.
I
SNUGLY ADJUST THE BELTS PROVIDED WITH
THIS CHILD RESTRAINT AROUND YOUR CHILD.
1-41