Chevrolet 1994 Lumina Owner's Manual page 39

4. Run the vehicle's safety belt through
or around the restraint. The child
restraint instructions will show you
how.
5. Buckle the belt. Make sure the release
button is positioned so you would be
able to unbuckle the safety belt
quickly if you ever had to.
6.
To tighten the belt, pull its free end
while you push down on the child
restraint.
7.
Push and pull the child restraint in
different directions to be sure it
is
secure. If the child restraint isn't
secure, turn the latch plate over and
buckle it again. Then see if it is
secure. If it isn't, secure the restraint
in a different place in the vehicle and
contact the child restraint maker for
their advice about how to attach the
child restraint properly.
To remove the child restraint, just
unbuckle the vehicle's safety belt. It will
be ready to work for an adult or larger
child passenger.
Securing
a
Child Restraint
in the Right Front Seat
To use a child restraint here, you will
need a special infant/child seat attaching
belt and the hardware that goes with it.
See the earlier section about the top strap
if the child restraint has one.
I