Table of Contents
Advertisement
Service
&
Appearance Care
*
.
Back-up Light Bulb
Replacement
See "Replacement Bulbs" in the Index to
:heck the size and type of
bulb
you need
o use.
T o Replace the Bulb:
I . Open the trunk and move the carpet
away from the back of the vehicle.
2.
Remove both tail/stop/turn signal
assemblies as described earlier in this
section.
3. Remove the four wing nuts behind
tht
back-up assembly.
4. Pull the back-up light assembly from
the vehicle.
5.
Push the tab on the socket and turn the
socket counterclockwise.
6. Pull the socket from the back-up
assembly.
7. To remove the bulb, pull
it
out of
the
socket. Do not twist the bulb.
8. Push the new bulb into the socket.
9.
Reverse steps 1-5 to replace the light
assemblies.
Windshield Wiper Blade
Replacement
Replacement blades come in different
types and are removed in different ways.
Here's how to remove the type with a
release clip:
1. Pull the windshield wiper arm away
from the windshield.
2. Lift the release clip with a screwdriver
and pull the blade assembly off the
wiper arm.
3.
Push the new wiper blade securely
on
the wiper arm.
Advertisement
Chapters
Table of Contents
