Table of Contents
Advertisement
Comfort Controls
& Audio
Systems
BASS: Slide this lever up to increase
bass, or down to decrease it.
SEEK
A:
Press to seek and stop on
the next station higher or lower on the
radio band.
SCAN:
Press both SEEK buttons
together to listen for a few seconds to
the next station on the AM or FM band;
the scan will continue every few
seconds to the next station on the AM
or FM band.
The radio will scan upward if you press
SEEKA first and downward if you
press
V
SEEK first. When the radio is
scanning stations, the word SCAN will
appear on the digital display.
Press either of the SEEK buttons or the
PWR-VOL knob to cancel
SCAN
and
select a station.
To Preset Radio Stations:
The four pushbuttons under the digital
display can be used to preset up to 14
radio stations (seven AM and seven FM
stations).
1.
Tune in the desired station.
2.
Press SET. The word SET will
appear on the digital screen for five
seconds.
3 . While
SET
is displayed, press one of
the four pushbuttons. Whenever you
press this button again, the preset
station will be tuned in.
4.
Repeat steps
1-3
for each of the four
AM and four FM stations.
Up to three additional stations on each
band may be preset by "pairing"
pushbuttons:
1.
Tune in the desired station.
2.
Press SET, and within five seconds
press any
two adjacent pushbuttons
at the same time. Whenever you press
these buttons again, the preset
station will be tuned in.
Advertisement
Table of Contents
