Table of Contents
Advertisement
Seats
&
Restraint Systems
34
1,
Make the belt as long as possible by
tilting the latch plate and pulling it
along the belt.
2.
Put the restraint on the seat. Follow
the instructions for the child
restraint.
as the instructions say.
3 . Secure the child in the child restraint
4.
Run the vehicle's safety belt through
or around the restraint. The child
restraint instructions
w i l l
show you how.
release button is positioned so you
would be able to unbuckle the safety
belt quickly if you ever had to.
6.
To tighten the belt, pull its free end
while you push down on the child
restraint.
5.
Buckle the belt. Make sure the
different dtlrections to be sure it is
secure. If the child restraint isn't
secure, turn the latch plate over and
buckle it again. Then see if it is
secure. If it isn't, secure the restraint
in a different place in the vehicle and
contact the child restraint maker for
their advice about how to attach the
child restraint properly.
To remove the child restraint, just
unbuckle the vehicle's safety belt. It will
be ready to work for an adult or larger
child passenger.
Advertisement
Table of Contents
