Storing Name Tags - Cadillac 2010 DTS Owner's Manual

Storing Name Tags

The system can store up to thirty phone numbers as
name tags that are shared between the Bluetooth and
OnStar systems.
The system uses the following commands to store and
retrieve phone numbers:
•
Store
•
Digit Store
•
Directory
Using the Store Command
The store command allows a phone number to be
stored without entering the digits individually.
b g
1. Press and hold
responds with "Ready" followed by a tone.
2. Say "Store". The system responds with "Store,
number please" followed by a tone.
for two seconds. The system
3. Say the complete phone number to be stored at
once with no pauses.
•
If the system recognizes the number it responds
with "OK, Storing" and repeats the phone
number.
•
If the system is unsure it recognizes the phone
number, it responds with "Store" and repeats
the number followed by "Please say yes or no".
If the number is correct, say "Yes". If the
number is not correct, say "No". The system will
ask for the number to be re-entered.
4. After the system stores the phone number, it
responds with "Please say the name tag" followed
by a tone.
5. Say a name tag for the phone number. The name
tag is recorded and the system responds with
"About to store <name tag>. Does that sound OK?".
•
If the name tag does not sound correct, say
"No" and repeat Step 5.
•
If the name tag sounds correct, say "Yes" and
the name tag is stored. After the number is
stored the system returns to the main menu.
4-111